I am happy to provide you with the results of our annual drinking water testing for 2021. Once again, every federal and state standard was met and the quality of your drinking water is excellent.
I also want to assure you that we are constantly checking your water. We have a state-of-the-art monitoring system from the treatment plant to your local pipes, and we take hundreds of thousands of tests each year to ensure that your water is safe. We are also closely watching other important issues that could affect our water, from climate change to cybersecurity. You can be sure that the safety of your drinking water is the top priority for the women and men of the MWRA.
We continue to take aggressive actions to reduce the risk of lead in drinking water. Since 2016, we have provided $30 million in zero-interest loans to 13 communities for full lead service line removals. System-wide, we remain below the Lead Action Level. Please read your community’s letter on page 7 for more information on your local water system.
PFAS - or ‘forever chemicals’ – remain a top news story. Since our source water is so well protected, our water easily meets the Massachusetts Department of Environmental Protection’s standards.
Last year, we welcomed two new communities to our water system: Ashland and Burlington. Our reservoirs have ample supplies to meet the needs of our service area; but, it is important that we all conserve water wherever possible. This is our most precious resource and we cannot afford to waste it.
I hope you will take a moment to read this report. We have great confidence in the water we deliver to your homes and businesses, and we want you to as well. Please contact us if you have any questions or comments about your water quality, or any of MWRA’s programs.
Frederick A. Laskey
For more information on MWRA and its Board of Directors, visit www.mwra.com
While the pandemic continued to impact health and supply lines in 2021, MWRA’s drinking water continued to meet all federal and state standards. MWRA staff carried out ongoing, uninterrupted treatment, sampling, testing, planning, and monitoring to ensure the continuous delivery of pure drinking water to all our customers. This annual water quality report illustrates MWRA’s ongoing efforts to ensure the provision of your water under all conditions.
Your Annual Water Quality Report
This annual water quality report provides consumers of MWRA water with important information on water quality. MWRA also has monthly water quality reports, information on specific potential contaminants, water system updates, and more at www.mwra.com. We welcome your questions at 617-242-5342 or Ask.MWRA@mwra.com.
At the Water Source… MWRA works with your community, the Department of Conservation and Recreation (DCR), and state and federal regulators to continuously evaluate your drinking water. From the reservoirs surrounded by forests and wetlands, through treatment and miles of pipelines, to your drinking water faucet. MWRA’s laboratories conduct hundreds of thousands of tests on the water you receive every year for over 120 potential contaminants.
MWRA’s work to protect the drinking water at your home or business starts with our two pristine reservoirs in central Massachusetts — the Quabbin Reservoir, 65 miles from Boston, and the Wachusett Reservoir, 35 miles from Boston. Combined, these two connected reservoirs provide an average of 200 million gallons of pure, highly protected, high quality water each day to 53 communities. The Ware River provides additional water when needed.
The Quabbin and Wachusett watersheds—areas that drain water to the reservoirs—are naturally protected. More than 85% of the watersheds are covered with forests and wetlands, which filter the rain and snow that enters the streams that flow to the reservoirs. This water comes in contact with soil, rock, plants, and other material as it follows its natural path to the reservoirs. This process helps to clean the water, but it also can dissolve and carry very small amounts of material into the reservoir. Minerals and rock do not typically cause problems in the water. Water can also transport contaminants, including bacteria, viruses or other potential pathogens, from human and animal activity, that can cause illness. Testing results show few contaminants are found in the reservoir water. The few that are detected are in very small amounts that are well below EPA’s standards.
MWRA and DCR maintain a nationally recognized watershed protection program. The Department of Environmental Protection’s (DEP) Source Water Assessment report for the Quabbin and Wachusett Reservoirs commended DCR and MWRA for our source water protection plans. The report states that our “watershed protection programs are very successful and greatly reduce the actual risk of contamination.” MWRA and DCR follow the report recommendations to maintain the pristine watershed areas. For more information on our source water, go to:www.mwra.com/sourcewater.html.
Testing to the Tap MWRA analyzes, treats and protects the quality of your water from its source to your home or business, starting with the watershed streams, to hundreds of miles of MWRA pipes and thousands of miles of local pipes, all the way to your home. MWRA testing shows that few contaminants are found in the water from our reservoirs. All were well below EPA’s standards in 2021.
A key, initial test for reservoir water quality is turbidity, or cloudiness. Turbidity refers to the amount of suspended particles in the water and can impair water disinfection. All water must be below 5 NTU (nephelometric turbidity units), and water can only be above 1 NTU if it does not interfere with effective disinfection. In 2021, typical levels in the Wachusett Reservoir were 0.29 NTU, with the highest level of turbidity at 0.61 NTU, well below the standard.
MWRA also tests water for potential disease-causing organisms, including fecal coliform bacteria, and parasites such as Giardia and Cryptosporidium, that can enter the water from animal or human waste. All test results for the reservoir water were well within state and federal testing and treatment standards.
Learn more about MWRA testing for waterborne contaminants and their potential health impacts on our website at: www.mwra.com.
MWRA Water Test Results 2021 EPA requires that MWRA test for over 120 contaminants that may be in drinking water.
MWRA found only those listed here. All of these levels were below EPA's Maximum Contaminant Levels (MCL).
(MCL) Highest Level Allowed
Range of Detections
Ideal Goal (MCLG)
How It Gets in the Water
0.008 - 0.01
Common mineral in nature
0 - 4.0
0.24 - 0.81
Additive for dental health
0.05 - 0.83
6 - 34.8
Byproduct of water disinfection
Halocetic Acids - 5
3.7 - 30.2
Byproduct of water disinfection
KEY: MCL = Maximum Contaminant Level. The highest level of a contaminant allowed in water. MCLs are set as close to MCLGs as feasible using the best available technology. MCLG = Maximum Contaminant Level Goal. The level of contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a magrin of safety. MRDL = Maximum Residual Disinfectant Level. The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants. MRDLG = Maximum Residual Disinfectant Level Goal. The level of a drinking water disinfectant below which there is no known or expected health risk. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contamination. ppm = parts per million. ppb = parts per billion. NS = no standard. ND = non-detect. ^ = As required by DEP, the maximum result is reported for nitrate.
Treating Your Water
Downstream of the reservoirs, MWRA’s John J. Carroll Water Treatment Plant in Marlborough provides state-of-the-art treatment and monitoring of your water. Our well trained and licensed operators add measured doses of treatment chemicals.
Ozone, made from pure oxygen, disinfects the water, killing bacteria, viruses and other organisms, and improves water clarity and taste.
Ultraviolet light (UV), a more powerful form of natural disinfection than sunlight, renders pathogens non-infectious.
Fluoride protects dental health.
The water chemistry is adjusted to reduce corrosion of lead from home plumbing.
Monochloramine (a compound of chlorine and ammonia), provides a mild and long-lasting disinfectant to protect the water as it
travels through miles of pipelines to your home.
Water Monitoring After Treatment
EPA and state regulations require regular monitoring of water quality tests to evaluate the water you drink. MWRA conducts hundreds of thousands of tests per year on over 120 contaminants. A complete list is available on www.mwra.com. The results of MWRA’s water quality tests in 2021 are shown in the table on page 2. They confirm the quality and safety of the water your community receives from MWRA.
Conservation, Climate Change, and Your Reservoirs
MWRA works with the communities we serve to promote water conservation. Efficient and wise use of our water keeps it available for the future. We monitor stream flow, reservoir levels and climate forecasts to ensure reliable supply under all conditions, including droughts and major storms. The engineers and planners who designed our supply left us a robust, reliable, system for the future.
Continuous Service + Redundancy = Reliability
Maintaining system redundancy allows us to continue uninterrupted water delivery to your community, even if sections of our system need inspection, repair or rehabilitation. Planning and environmental review for two new tunnels north and south of Boston to provide reliable service to the entire region is well underway. We also have major projects underway to rehabilitate the Weston Aqueduct Supply Main 3, a 60-inch pipe in Weston, Waltham, Belmont, Arlington and Medford, as well as a 48-inch pipe in Stoneham and Woburn. See www.mwra.com for more info.
MWRA provides zero–interest loans to communities for pipeline rehabilitation and other water quality improvements. During 2021, we loaned $28 million to 18 communities for pipeline projects and $11 million to 8 communities for lead service line replacements.
Monitoring All Day, Every Day
MWRA’s monitoring systems are in operation continuously, 24/7/365. The systems help us evaluate your water before and after treatment. They also help us determine if the water is free of contaminants, and to respond rapidly to changes or issues related to water quality.
Sodium and Drinking Water
MWRA tests for sodium monthly, and the highest level was 39.3 mg/L (about 10 mg per 8 oz. glass). This level would be considered to be Very Low Sodium by the Food and Drug Administration (FDA). Sodium in drinking water contributes only a small fraction of a person’s overall sodium intake (less than 5%).
Lead can be found in your home, including plumbing and your drinking water. Learn about the health impacts of lead, and how to reduce exposure to this toxic metal on the following pages.
How Lead Affects Health and Development
Lead affects young children, and may cause damage to the brain, slow growth and development, and learning and behavior problems. Preventing lead exposure is particularly important if a pregnant woman or a child lives in your home or apartment. Lead can also impact the health of your entire family. While lead poisoning frequently comes from exposure to lead paint dust or chips, lead in drinking water can also contribute to chronic, total lead exposure
Important Lead Information From EPA
If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water comes primarily from materials and components associated with service lines and home plumbing. MWRA is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components. If your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline at 1-800-426-4791 or www.epa.gov/safewater/lead.
What is An Action Level?
An Action Level is the amount of lead that requires action to reduce exposure. If your home or school’s drinking water is above the lead Action Level, additional steps to reduce lead may be required. If more than 10% of your community’s samples were over the lead Action Level, your local water department is taking action to address the problem.
How Lead Can Enter Your Water
Lead in your home plumbing or a lead service line can contribute to elevated lead levels in the water you drink. MWRA’s water is lead-free when it leaves our reservoirs. Distribution pipes that carry the water to your community are made mostly of iron and steel, and do not add lead to the water. Lead can enter your tap water from your service line (the line that connects your home to the water main) if it is made of lead, lead solder used in plumbing, or from some older faucets.
Corrosion, or wearing away of lead-based materials can add lead to tap water, especially if water sits for a long time in the pipes before it is used. MWRA’s corrosion control program helps limit the amount of lead in your water. In 1996, MWRA began adding sodium carbonate and carbon dioxide to adjust the water’s pH and buffering capacity. This treatment makes the water less corrosive and reduces leaching of lead into drinking water. Lead levels found in sample tests of tap water have dropped by nearly 90% since this treatment change. Learn more about lead in drinking water at www.mwra.com.
MWRA Meets Lead Standard in 2021
Under EPA/DEP rules, MWRA and your local water department are required to test tap water each year. We collect samples from homes with lead service lines or lead solder. The EPA rule requires that 9 out of 10 homes tested must have lead levels below the Action Level of 15 parts per billion (ppb).
This testing process can provide information on whether lead is corroding and mixing with the drinking water. It also provides communities and homeowners with information on how to reduce lead in their drinking water. The results do not reflect lead levels in all homes.
All sampling rounds over the past 18 years have been below the EPA Action Level. Nine out of ten homes were below 8.56 ppb—well below the Action Level.
Five communities—Boston, Malden, Medford, Melrose and Winthrop—were above the lead Action Level in September 2021. Your community letter will provide you with local results and more information.
Lead and Copper Results, September 2021
Ideal Goal (MCLG)
# Homes Above AL/# Homes Tested
Key: AL = Action Level - The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.
Lead Service Lines
A service line connects your home or building to the water main in the street. If yours is made of lead, it can be the main source of lead in your tap water. Older pipes that combined galvanized iron and lead connectors (“goosenecks”) can also release lead. Lead services lines should be removed entirely to prevent lead in your drinking water.
Replacing Lead Service Lines
Your local water department can help find out if you have a lead service line, and provide help in replacing it. In some cases, an onsite check is necessary to determine the specific piping to your building.
You can also see if your service line is made of lead by scratching the pipe near your water meter with a key or other metal object. Lead pipes will show a dull grey color, while copper pipes will not. For an online how-to guide,
go to www.epa.gov/pyt.
MWRA Funding to Replace Lead Service Lines
MWRA and its Advisory Board offer zero-interest loans to customer communities for full lead service line replacement projects. Each MWRA community can develop its own local plan, and many communities have already taken steps to remove lead service lines. To find out more, contact your local water department.
3 Ways to Reduce Lead in Your Water
Remove your lead service line
Run your water before using
Use a filter certified to remove lead
Reduce Your Exposure to Lead
Remove Lead Piping
Find out if you have a lead service line or lead components in your plumbing. Learn about options for removal of this piping from your local water department.
Other Measures for Lead Reduction
Any time water has not been used for more than 6 hours, run the faucet used for drinking water or cooking until after the water becomes cold.
Let water run before using it—fresh water is better than stale. To save water, fill a pitcher with fresh water and place it in the refrigerator for future use.
Never use hot water from the faucet for drinking or cooking, especially when making baby formula or other food for infants or young children.
Remove loose lead solder and debris. Every few months, remove the aerator from each faucet and flush the pipes for 3 to 5 minutes.
Be careful of places where you may find lead in or near your home. Paint, soil, dust and pottery may contain lead. Call the Massachusetts Department of Public Health at 1-800-532-9571 or 1-800-424-LEAD for information on lead and health impacts.
How to Test Your Drinking Water
If you are concerned about lead piping in your home, contact your local water department about testing for lead in your drinking water. MWRA also maintains a list of certified laboratories and sampling instructions on our website at www.mwra.com. You may also call MWRA at 617-242-5323.
Lead Testing in Schools
Children can consume most of their drinking water at school or daycare. The plumbing inside some schools and childcare facilities can contain lead and contribute to lead exposure. MWRA, in coordination with DEP, provides no-cost lab analysis and technical assistance for schools and day care centers in MWRA communities. This service has been offered since 2016, and nearly all MWRA communities have participated. To date, more than 39,000 tests have been completed in more than 530 schools. Results are available on the MassDEP website at: www.mass.gov/dep (search for “lead in schools”). You may also contact your local school or water department for results.
MWRA works with local water departments to sample and test 300-500 water samples each week for total coliform bacteria. Total coliform bacteria can come from the intestines of warm blooded animals, or can be found in soil, plants, or other places. Most of the time, they are not harmful. However, their presence could signal that harmful bacteria from fecal waste may be there as well. If total coliform is detected in more than 5% of samples in a month, the water system is required to investigate the possible source and fix any identified problems. If a water sample does test positive, we run a more specific test for E. coli, which is a bacteria found in human and animal fecal waste and may cause illness. If your community was required to do an investigation, or found E. coli, it will be in the letter from your community.
Important Research for New Regulations
MWRA works with EPA and health research organizations to help define new national drinking water standards by collecting data on water contaminants that are not yet regulated. Very few of these potential contaminants are found in MWRA water due to our source water protection efforts. Information on this testing, as well as data on PFAS, disinfection by-products, Giardia and Cryptosporidium, and other contaminants can be found at www.mwra.com.
MWRA Monitoring for PFAS
PFAS compounds, used since the 1950s for many purposes from stain and water proofing to firefighting, continue to be a concern. In 2020, MassDEP published a drinking water standard for PFAS. MWRA water is now tested for 6 different PFAS compounds or “PFAS6.” Tests of MWRA water show only trace amounts of these compounds, well below the state standard of 20 parts per trillion. See www.mwra.com.
Important Health Information: Drinking Water and People with Weakened Immune Systems
Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants, can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the EPA’s
Safe Drinking Water Hotline (1-800-426-4791).
EPA Information on Bottled Water and Tap Water
Complaints Are Important!
You can help provide information about local water quality. Every call is investigated. Most complaints are related to discolored water (usually related to local construction or hydrant use), or conditions in a building’s plumbing. Contact your local water department, or call MWRA at (617) 242-5323.
Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the EPA’s Safe Drinking Water Hotline (1-800-426-4791) or MWRA. In order to ensure that tap water is safe to drink, the Massachusetts DEP and the EPA prescribe regulations which limit the amount of certain contaminants in water provided by public water systems. The U.S. Food and Drug Administration (FDA) and the Massachusetts Department of Public Health (MDPH) regulations establish limits for contaminants in bottled water, which must provide the same protection for public health.
Cross-Connection Information A cross-connection is any temporary or permanent connection between a potable (drinking) water source and a non-potable source. Non-potable water or other sources can contaminate your drinking water if backflow occurs.
Sources could include:
Irrigation systems or wells
Residential fire protection systems
Massachusetts DEP recommends the installation of backflow prevention devices for inside and outside hose connections to help protect the water in your home as well as the drinking water system in your town. For more information on cross-connections, please call 617-242-5323 or visit www.mwra.com.
Continue to Conserve MWRA water use has dropped by over a third since the 1980s. It’s up to all of us to continue to use water wisely. Every drop is valuable. Our website has many tips on how to save water indoors and outside.
Where To Go For Further Information
Massachusetts Water Resources Authority, 617-242-5323 www.mwra.com
Swampscott Department of Public Works
Elihu Thompson Building
22 Monument Avenue
Swampscott, MA 01907-1977 781-569-8860 Fax 781-596-8826
Public Water Supply
The Swampscott Department of Public Works is pleased to provide this annual newsletter to keep you informed about your water system. The Town of Swampscott purchases all of its water directly from the Massachusetts Water Resources Authority (MWRA). The water is delivered through two MWRA master meters into the town’s distribution system. The distribution system consists of a network of pipes, valves, hydrants and service lines. The system delivers water to homes, businesses, schools and other facilities for drinking and other uses.
Swampscott’s distribution system is comprised of approximately 57 miles of water mains ranging from 6 to 16-inches in diameter, with 473 hydrants. There are approximately 1400 gate valves that allow isolated portions of the system to be shut down for repairs and
maintenance. Swampscott has continued to make improvements to the water system, including a 2021 town wide leak detection survey. This survey was performed to reduce unaccounted for water by identifying hidden and surfaced leaks. During the survey two leaks were located, representing an estimated loss of approximately 28,800 gallons per day, or if left unrepaired approximately 10.5 million gallons per year. The subsequent repairs led to the reduction of purchased water from the MWRA. However, due to the rising cost to supply water, the Town once again had to increase the water rate. Although it should be noted, as opposed to years past when all users
experienced the same increase, Swampscott implemented a tiered consumption rate. This tiered system resulted in low end users seeing a 3.0% increase, while high end users saw a 10% increase.
Seventy percent of the pipes in the distribution system are over fifty years old with approximately sixty percent unlined cast iron pipe. Unlined pipe allows tuberculation (rust) to accumulate on the inside surfaces of the pipe. While not a health issue, these tubercles can affect the ability of the pipe to carry flows for firefighting purposes and can affect the appearance of your water, i.e. yellow or red discoloration.
The Town, working with the MWRA, tests nine samples bi-weekly for total coliform bacteria to monitor the distribution system. The Massachusetts Department of Environmental Protection (MA DEP) requires that no more than one of the samples in a month may be positive. Swampscott had zero positive results for the entire year. The Town is also responsible for conducting lead and copper testing of samples on an annual basis. It is important to note that the water supplied by the MWRA does not contain any lead. However,
Swampscott remains concerned about lead in tap water. Therefore, we test fifteen homes and two schools yearly. The 90th percentile level for Swampscott was 3.24 ppb, which is well below the Action Level of 15 ppb. Please see page 5 for more information on lead in tap water. Additionally, the 90th percentile value for copper was 162 ppb, which again was well below the copper action level of 1300 ppb.
As part of the Town’s continuing effort to upgrade its water distribution system, the 10-inch main on Atlantic Ave (from the Puritan/ Humphrey split to Shepard Ave.) was cleaned and lined, resulting in improved water quality and pressure. Additionally, the 6-inch main on Jesse Street will be replaced with a new cement lined 8-inch main this spring. New hydrants and gate valves were installed on Atlantic Ave. and will be installed on Jesse Street. This project is funded using MWRA zero interest loans and is the nineteenth year in which the town has taken advantage of the MWRA’s financial assistance.
The Town of Swampscott is committed to providing its residents with the best water possible. As our customers, we hope that you will find this report informative and useful. If you would like to obtain additional information on particular subjects, want to know about town meetings, or have specific questions, please feel free to contact the Department of Public Works, at (781) 596-8860, or e-mail the Director at email@example.com. You may also contact the MWRA directly using the phone numbers listed in this report.